ESP32, Cara Mengakses TelegramBot Kontrol Relay / Led

pada kesempatan kali ini saya akan menuliskan artikel tentang ESP32, Cara Mengakses TelegramBot Kontrol Relay / Led.


Tutorial Sebelumnya Baca Juga  : ESP32, Cara Mengakses LCD I2C 16×2

sebelumnya juga saya sudah menuliskan banyak artikel mengenai Telegram Bot dengan ESP8266, sekarang kita akan mencoba meggunakan ESP32 untuk mengontrol Relay dengan Telegram

keyword :
Bot Telegram ESP32
ESP32 TelegramBot
Belajar ESP32
Belajar ESP32 Pemula
Kontrol LED ESP32 TelegramBot
Universal TelegramBot

baiklah, sebelum itu siapkan dulu bahan bahannya.

ESP32
LED
Library Universal Telelgram yang dapat di download disini!! bila diperlukan library Arduinojson.h silahkan download disini!!

selanjutnya silahkan buat Program Telegram Bot seperti dibawah ini :

#include <WiFi.h>
#include <WiFiClientSecure.h>
#include <UniversalTelegramBot.h>
// Initialize Wifi connection to the router
char ssid[] = “www.anakkendali.com”;     // your network SSID (name)
char password[] = “www.anakkendali.com”; // your network key
// Initialize Telegram BOT
#define BOTtoken “518247654:AAGnJ3bwQoixeX4nDDLb-JdmA1vPsD85gRo”  // your Bot Token (Get from Botfather)
WiFiClientSecure client;
UniversalTelegramBot bot(BOTtoken, client);
int Bot_mtbs = 1000; //mean time between scan messages
long Bot_lasttime;   //last time messages’ scan has been done
bool Start = false;
const int ledPin = 15;
int ledStatus = 0;
void handleNewMessages(int numNewMessages) {
Serial.println(“handleNewMessages”);
Serial.println(String(numNewMessages));
for (int i=0; i<numNewMessages; i++) {
String chat_id = String(bot.messages[i].chat_id);
String text = bot.messages[i].text;
String from_name = bot.messages[i].from_name;
if (from_name == “”) from_name = “Guest”;
if (text == “/ledon”) {
digitalWrite(ledPin, HIGH);   // turn the LED on (HIGH is the voltage level)
ledStatus = 1;
bot.sendMessage(chat_id, “Led is ON”, “”);
}
if (text == “/ledoff”) {
ledStatus = 0;
digitalWrite(ledPin, LOW);    // turn the LED off (LOW is the voltage level)
bot.sendMessage(chat_id, “Led is OFF”, “”);
}
if (text == “/status”) {
if(ledStatus){
bot.sendMessage(chat_id, “Led is ON”, “”);
} else {
bot.sendMessage(chat_id, “Led is OFF”, “”);
}
}
if (text == “/start”) {
String welcome = “Welcome to Universal Arduino Telegram Bot library, ” + from_name + “.n”;
welcome += “This is Flash Led Bot example.nn”;
welcome += “/ledon : to switch the Led ONn”;
welcome += “/ledoff : to switch the Led OFFn”;
welcome += “/status : Returns current status of LEDn”;
bot.sendMessage(chat_id, welcome, “Markdown”);
}
}
}

void setup() {
Serial.begin(115200);
// Attempt to connect to Wifi network:
Serial.print(“Connecting Wifi: “);
Serial.println(ssid);
// Set WiFi to station mode and disconnect from an AP if it was Previously
// connected
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
Serial.print(“.”);
delay(500);
}
Serial.println(“”);
Serial.println(“WiFi connected”);
Serial.print(“IP address: “);
Serial.println(WiFi.localIP());
pinMode(ledPin, OUTPUT); // initialize digital ledPin as an output.
delay(10);
digitalWrite(ledPin, LOW); // initialize pin as off
}
void loop() {
if (millis() > Bot_lasttime + Bot_mtbs)  {
int numNewMessages = bot.getUpdates(bot.last_message_received + 1);
while(numNewMessages) {
Serial.println(“got response”);
handleNewMessages(numNewMessages);
numNewMessages = bot.getUpdates(bot.last_message_received + 1);
}
Bot_lasttime = millis();
}
}

Selanjutnya Baca Juga : ESP32, Cara Mengakses Sensor DHT11

program diatas sudah ada pada contoh library yang sudah di download di atas.
mungkin cukup sekian apa yang bisa saya bagikan kali ini, semoga bermanfaat. jika ada yang ingin ditanyakan silahkan chat melalui WA atau Messenger.